ESS-WFB / Bullard - USA
- Glass has high heat resistance, good for use by fire fighters. Goggles can be worn directly or combined with a protective helmet.
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace.
- The product meets NFPA 1971-2000 and ANSI Z87.1 standards

ESS-XTO / Bullard - USA
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace; The elastic strap easily hangs around the top of the helmet.
- Good for use in high temperature environments, fire resistant, suitable for equipping fire fighters.
- The product meets American standards NFPA 1971-2000 and ANSI Z87.1

Electric welding mask 3350 / VIKING-USA
- 4C Lens Technology, 1/1/1/1 Optical Clarity and Extra Large Viewing Area of ​​12.5 Square Inches
- Innovative X6 headgear helps distribute weight, reduce pressure and optimize balance

SZ-MST S2/China
- Filter size: 110x90x10mm, fixedly mounted on the welding mask. Many other types of filters of the same size can be replaced with this mask.
- View window size: 92x42mm
- Light / dark status: DIN 4/DIN 9-13
- Adjustment knob (left side of mask): When placed in the off position, the darkness is 4 (corresponding to the case of eye protection when welding), rotate clockwise to get darkness 9,10,11, 12,13 depending on the electric current intensity when welding.
- Extremely fast automatic "darkness" adjustment speed: 1/25,000 second
- Delay time: adjustable from 0.2 to 0.8 seconds (turn the DELAY knob from min to max)
- Use lithium batteries and solar batteries
- Light sensitivity: Adjustable from low to high (rotate knob from LO to HI)
- Green
- The product meets European EN standards

SZ-MST S1/ China
- Filter size: 110x90x10mm, fixedly mounted on the welding mask. Many other types of filters of the same size can be replaced with this mask.
+ Visible area size: 100x50mm
+ Light / dark status: DIN 4/DIN 9-13
- Adjustment knob (right side of mask): Rotate clockwise to get darkness 9,10,11,12,13 depending on the intensity of the electric current when welding.
- Extremely fast automatic "darkness" adjustment speed: 1/25,000 second
- Light sensitivity: Adjustable (rotate knob from LO to HI)
- Delay time: 0.6 seconds
- Power supply: 2 small batteries and solar battery
- On and off mode: Open by pressing button (ON) - Turn off automatically
- Light sensitivity: Adjustable (rotate knob from LO to HI)
- The product meets EN379:2003, EN 169:2002, EN 175:1997, ANSI Z87.1.2010 standards

SZ-MST S2/China
- Filter size: 110x90x10mm, fixedly mounted on the welding mask. Many other types of filters of the same size can be replaced with this mask.
- View window size: 92x42mm
- Light / dark status: DIN 4/DIN 9-13
- Adjustment knob (left side of mask): When placed in the off position, the darkness is 4 (corresponding to the case of eye protection when welding), rotate clockwise to get darkness 9,10,11, 12,13 depending on the electric current intensity when welding.
- Extremely fast automatic "darkness" adjustment speed: 1/25,000 second
- Delay time: adjustable from 0.2 to 0.8 seconds (turn the DELAY knob from min to max)
- Use lithium batteries and solar batteries
- Light sensitivity: Adjustable from low to high (rotate knob from LO to HI)
- Green
- The product meets European EN standards