ESS-WFB / Bullard - USA
- Glass has high heat resistance, good for use by fire fighters. Goggles can be worn directly or combined with a protective helmet.
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace.
- The product meets NFPA 1971-2000 and ANSI Z87.1 standards

ESS-XTO / Bullard - USA
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace; The elastic strap easily hangs around the top of the helmet.
- Good for use in high temperature environments, fire resistant, suitable for equipping fire fighters.
- The product meets American standards NFPA 1971-2000 and ANSI Z87.1

DN50x20M / Dragon - VN
- Inner diameter: 51mm
- Length: 20m±0.2m
- Faucet thickness: 1.15mm
- Working pressure: 1.6Mpa
- Weight: 4.3±0.2kg
- Faucet body: PVC inner coating with higher durability and anti-aging than rubber makes the faucet lighter and easier to use.
- Outer fabric layer of the push faucet: 100% Polyester (durable fiber, anti-friction, high abrasion resistance)
- Joint: high quality aluminum alloy, fireproof paint, resistant to strong impacts without breaking or cracking.
- Joint and faucet body are connected by hydraulically pressed steel belt, safe during use with high pressure.
- Standard: TCVN5740:2009

SYNTHETIC SPECIAL 500 / ESCHBACH (Germany)
- Material: Polyester fiber, rubber coated inside
- Working pressure: 17 Bar
- Tested water pressure: 30 MPA
- Pipe diameter: 50mm
- Pipe length: 20m

DN65x20M / Dragon - VN
- Inner diameter: 66mm
- Length: 20m±0.2m
- Faucet thickness: 1.15mm
- Working pressure: 1.6Mpa
- Weight: 5.2±0.2kg
- Faucet body: PVC inner coating with higher durability and anti-aging than rubber makes the faucet lighter and easier to use.
- Outer fabric layer of the push faucet: 100% Polyester (durable fiber, anti-friction, high abrasion resistance)
- Joint: high quality aluminum alloy, fireproof paint, resistant to strong impacts without breaking or cracking.
- Joint and faucet body are connected by hydraulically pressed steel belt, safe during use with high pressure.
- Standard: TCVN5740:2009

Việt Nam
- Sản xuất theo thông tư 48 Bộ Công An
- Chất liệu: nhựa
- Có lót thép chống đâm xuyên, chống thấm nước
- Là trang bị dùng cho đơn vị dân phòng chữa cháy, không dùng cho lính cứu hoả chuyên nghiệp.
- Màu xám đế đỏ
- Size: 41, 42, 43

FB-01 / Penco
- Material: Polyethylene synthetic rubber
- Anti-fingering steel tip
- Anti-pierce inner steel sole. Anti-piercing force ≥1100N
- Withstand voltage ≥5000V. Breaking force  ≥10.78KN
- Color: Black combined with gold
- Weight  3 - 3.6kg / pair (Depending on size)
- Features: Anti-abrasion, anti-cut, anti-puncture, anti-fire, heat-insulating, electrical, anti-oil, anti-slip, anti-acid,  alkali...Very comfortable and pleasant to wear.

Túi A / VN*
- Không chiếm quá nhiều không gian, Đặc biệt thích hợp cho văn phòng hoặc số lượng công nhân khoảng 25 người. 
- Đồ dùng gọn nhẹ đảm bảo chất lượng được sắp ngăn nắp, vệ sinh trong túi. 
- Túi sơ cứu dùng trong các trường hợp bị vấp té đau nhức tay chân nhẹ, trầy xước nhẹ, đứt tay, hoặc làm sạch các vết thương sơ bộ trước khi xử lý‎ các bước tiếp theo.
- Trang bị theo Thông tư số 19/2016/TT-BYT ngày 30 tháng 6 năm 2016 của Bộ trưởng Bộ Y tế ban hành về  Quy Định Về Túi Sơ Cứu Tại Nơi Làm Việc

P911 - Việt Nam
- Phao cứu sinh tròn.
- Vỏ bằng vải tổng hợp có màu sắc: Trắng đỏ + Da cam.
- Ruột bằng vật liệu nổi tổng hợp.
- Kiểm tra chất lượng theo Tiêu chuẩn hiện hành.
- Xuất xứ: Việt nam

P911 - Việt Nam
- Chất liệu: nhựa tổng hợp
- Phao cứu sinh tròn.
- Vỏ bằng nhựa tổng hợp có màu sắc: trắng phản quang + cam.
- Kiểm tra chất lượng theo Tiêu chuẩn hiện hành.
- Xuất xứ: Việt nam

FH911/Bullard (USA)
- Weight: 490g
- Dimensions: Width - 11"(280mm); Length - 12 ¾" (325mm); Height - 6"(150mm)
- Hat body is made of heat-resistant and high impact-resistant material.
- Adjust helmet size with knob (FRS6RC) or button (FRS6PC)
- There are 3 available positions inside the hat body to connect to the heat-resistant spine cover Model R711
- The outside of the helmet body has a latch to attach fire goggles (Model ESS -XTO or ESS-WFB has a wide field of view)
- The product meets NFPA 1977:2011 standards

Vietnam
- Material: powder coated aluminum
- Printed red paint that does not fade
- Bearing weight: 60kg
- Size: 20x20x23-33cm

Vietnam
- Material: powder coated aluminum
- Printed red paint that does not fade
- Bearing weight: 80kg
- Dimensions: 40 x 21 x 30cm

Fire Blanket 1.8x1.8 / Yutraco (Korea)*
- Material: heat-resistant fireproof fiberglass
- Heat resistant to 700oC, does not flow, does not burn, does not shrink
- Non-rotting, anti-corrosion, non-toxic
- Has black strap and red carrying bag
- Standard EN1869:1997

Ambulance stretcher/VN*
- Load capacity: 100kg
- Size of stretcher surface: 1700 x 530 mm
- Overall size: 2210 x 550 x 200 mm
- Dimensions after folding: 1110 x 250 x110 mm
- Weight: 6kg
- Used in rescuing factories, industrial parks, medical stations, commercial centers, factories

Fire Pro-01 fireproof suit, type 4, heat resistant to 300 degrees, dark blue according to new TT150 (Vietnam)
Includes 5 dishes:
- Nomex 4-layer clothing, weight 2.5kg/set.
- Waterproof, heat resistant, heat resistant to 300 degrees Celsius
- Red hat has an aluminum nape protector
- Specialized black and yellow heat-resistant boots with straps
- Dark blue gloves
- 3M 1860 mask
Has inspection stamp.

Vietnam - China
- Material: slow burning Nomex fabric
- 2 layers: fireproof layer and lining layer
- Withstands temperatures of 200~300ºC
- Subject to open flame for 2~7s
- Separate shirt, separate pants
- Has 3M heat-resistant reflective wire
- Color: Dark blue (available), Orange, Sand yellow
- Size: M, L

MT5 / Vietnam
- Material: liquefied CO2 gas, pressurized
- The tank shell is made of thick, durable steel
- Used to extinguish fires of solid substances, gases, and electrical equipment
- After spraying, CO2 gas will evaporate
- Weight of gas in tank: 5kg
- Weight + bottle: 14.5kg
- Dimensions: 54 x 13.5 x 13.5cm
- Working temperature: from -20ºC to 50ºC
- Warranty: 6 months

MT5 / China
- Material: liquefied CO2 gas, pressurized
- The tank shell is made of thick, durable steel
- Used to extinguish fires of solid substances, gases, and electrical equipment
- After spraying, CO2 gas will evaporate
- Weight of gas in tank: 5kg
- Weight + bottle: 14.5kg
- Dimensions: 54 x 13.5 x 13.5cm
- Working temperature: from -20ºC to 50ºC

MT3 / Vietnam
- Material: liquefied CO2 gas, pressurized
- The tank shell is made of thick, durable steel
- Used to extinguish fires of solid substances, gases, and electrical equipment
- After spraying, CO2 gas will evaporate
- Weight of gas in tank: 3kg
- Weight + bottle: 10.5kg
- Dimensions: 48 x 12.5 x 12.5cm
- Working temperature: from -20ºC to 50ºC