ESS-WFB / Bullard - USA
- Glass has high heat resistance, good for use by fire fighters. Goggles can be worn directly or combined with a protective helmet.
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace.
- The product meets NFPA 1971-2000 and ANSI Z87.1 standards

ESS-XTO / Bullard - USA
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace; The elastic strap easily hangs around the top of the helmet.
- Good for use in high temperature environments, fire resistant, suitable for equipping fire fighters.
- The product meets American standards NFPA 1971-2000 and ANSI Z87.1

FH911/Bullard (USA)
- Weight: 490g
- Dimensions: Width - 11"(280mm); Length - 12 ¾" (325mm); Height - 6"(150mm)
- Hat body is made of heat-resistant and high impact-resistant material.
- Adjust helmet size with knob (FRS6RC) or button (FRS6PC)
- There are 3 available positions inside the hat body to connect to the heat-resistant spine cover Model R711
- The outside of the helmet body has a latch to attach fire goggles (Model ESS -XTO or ESS-WFB has a wide field of view)
- The product meets NFPA 1977:2011 standards

Fire Blanket 1.8x1.8 / Yutraco (Korea)*
- Material: heat-resistant fireproof fiberglass
- Heat resistant to 700oC, does not flow, does not burn, does not shrink
- Non-rotting, anti-corrosion, non-toxic
- Has black strap and red carrying bag
- Standard EN1869:1997

ZEVS-U / Sorbent - Russia*
- Effective protection of toxic gases and CO produced during fires for > 30 minutes ~ 60 minutes
- ZEVS-U with hood for respiratory, eye, face and head protection, equipped to escape from contaminated areas,  generated by combustion: carbon monoxide, other toxic chemical gas vapors, aerosols The gas in the smoke, dust, and mist created by the fire.
- ZEVS-U maintains its protective properties even when subjected to temperature conditions of up to 200 degrees Celsius for 1 minute and the impact of a flame with a temperature of 800 ± 50 degrees Celsius for 5 seconds.
- Rope is a device used to help a person escape from fires in houses, hotels, hospitals, buildings and other similar objects. Single use only.
- ZEVS-U meets the requirements of the European standard EN 403: 2004.
- Directly imported goods have CO and CQ

EPK-20 / Eco Pure - Korea
- Material: high quality fireproof rubber, prevents heat radiation
- Design: full head cover, transparent viewing glass, wide escape vision >70%. Compact and lightweight, easy to use. Type 2 filters help filter smoke effectively and make breathing easier.
- Use for all subjects, both adults and children, regardless of face size.

Fire Blanket 1.8x1.8 / YongJin (China)
- Material: heat-resistant fireproof fiberglass
- Heat resistant to 500oC, does not flow, does not burn, does not shrink
- Non-rotting, anti-corrosion, non-toxic
- Has black strap and red carrying bag

- Dimensions: 410x210x95mm
- Wiring points can be equipped inside for easier installation.
- Spacious interior space is convenient for wiring.
- Can be installed horizontally or vertically depending on the design of the building
- Bell - Light - Push button assembly housing

- Model: MPF-6AB-24V
- Origin: Taiwan
- Material: Stainless steel + ABS plastic base
- Voltage: 12/24VDC
- Current consumption: under 30mA
- Sound intensity: 95dB
- Color: Red

HDF-13 / Thailand
- Maximum pump flow: 1200 L/Min (73m3/hour)
- Maximum spray pressure: 6.5 Kg/cm2
- Pump flow (L/min@head):
+ 350 L/min@60m
+ 850 L/min@40m
- Dimensions (LxWxH): 130x88x65 cm
- Float material: Composite
- Weight: 71 kg
- Suction method: self-suction
- Pump head: pressure-resistant cast aluminum housing, centrifugal impeller
- Suction diameter: 80mm
- Nozzle diameter: 80mm or (1x65 + 2x55) mm
- Gasoline engine: Seikoo brand, Model SK15D, 4-stroke, 1 cylinder, air-cooled.
- Engine capacity: 15HP@3600 rpm
- Cylinder capacity: 420cc
- Fuel consumption: 1.2 L/hour
- Fuel tank capacity: 7 L
- Oil capacity: 1.4 L
- Starting method: Self-winding pull cord or electric start.
- Ignition method: by IC