Skip to Content

CONSTRUCTION - PRODUCTION

Longdar WH770 welding mask attached to helmet
WH-770 / Longdar (Taiwan)
- Material: Polypropylene
- Hat mounting type, fits all Taiwanese hats
- Glass window 50 x 107 mm
- Welding glass layer: 1 tempered glass and 1 No. 11 welding glass
- Inner layer: 1 eye protection glass
- Meets ANSI Z87.1 standards
0 ₫ 0.0 VND
JOGGER HERCULES rubber boots code (Size 38-47)
Hercules - Jogger / Belgium - China*
- Features: Waterproof, anti-static, shock absorbent, anti-slip, anti-nail, anti-impact, anti-fingerprint, anti-oil and fuel
- Material: sole made of PVC
- Armored shoe toes prevent impact and crushed toes
- The sole of the shoe is lined with an anti-nail steel plate to prevent piercing from sharp iron objects
- Meets European standards EN 345 - S5
- Sizes 38 - 47
0 ₫ 0.0 VND
JOGGER leather boots code BESTBOOT (Size 39 ~ 45)
GYU 6318 - Jogger /Belgium - China*
- Features: Waterproof, anti-static, shock-absorbing, anti-slip, anti-nail, anti-impact, anti-fingerprint, anti-oil and fuel.
- PU molded sole with high friction, good anti-slip
- Boot leather is made from high quality animal leather and is waterproof
- Steel toe cap protects against impact and crushed toes
- The sole of the boot is lined with anti-nail steel, preventing piercing from sharp iron objects
- Meets European standards EN 345 - S3
- Weight: ~ 1520 gr / pair (size 40)
- Sizes 36 - 47
0 ₫ 0.0 VND
Protective helmet COV HF001 has a face shield
HF-001A/COV (Korea)
- Material: heavy-duty ABS plastic
- Adjust the bridge band with a knob, there is a shock-absorbing foam pad inside.
- There is a front visor that can be pushed up
- The nose of the cone has a clear plastic panel that does not obstruct vision when looking up
- Safe design, capable of withstanding high impact force.
- KCS standards (Korea)
0 ₫ 0.0 VND
INGCO Pressure Washer - HPWR18008
HPWR18008/INGCO
- Voltage: 220V~50Hz
- Capacity: 1800W
- Brushed motor, pure copper wire motor
- Maximum pressure: 150Bar (2200PSI)
- Flow rate: 6.0 L/min
- The machine has an automatic stop mode. Smart design with rubber wheels, flexible and easy to move anywhere
- Comes with 1 bottle of soap, 1 set of spray gun, 1 high pressure spray line 5m long
- Weight: 8 kg
0 ₫ 0.0 VND
Premium 18V-10 L GAS Battery Vacuum Cleaner (solo) - BOSCH
GAS 18V-10 L Premium / BOSCH
- Battery voltage: 18V
- Container volume: 10 L
- Weight (excluding battery): 4.7 Kg
- Filter surface area: 2,375 cm2
- Maximum air flow level: 24 l/s
- Maximum vacuum pressure: 115 mbar
- Suction capacity: wet and dry
Attached accessories: hook, wheels, adapter, connecting pipe, suction head
0 ₫ 0.0 VND
Polishing Machine BOSCH GPO 12 CE
GPO 12 CE /BOSCH
- Power: 1250 W
- No-load speed: 750-3000 rpm
- Grinding wheel shaft thread: M14
- Rubber mat, diameter: 180 mm
- Weight: 2.5 KG
Included accessories: handle, wrench, fleece pad, polished plastic base
0 ₫ 0.0 VND
Anbaco K23 glass is chemical/dust/paint resistant
K.23 / Anbaco (Vietnam)
- The glasses frame is made of PVC with foam padding to make it comfortable to wear and create a tight seal.
- The glasses are made of glass, so they are not blurred by chemicals or scratched, and are easy to clean when dirty.
- Product manufactured by An Bac company
0 ₫ 0.0 VND
Klauke HK12042 12-ton beltless hand pliers
HK12042 / Klauke
Used to press all types of cosse heads or joints.
– The operation of creating hydraulic pressure of the pliers is done manually through the lever, with a light operation suitable for Vietnamese people.
– Automatically release the pressure valve when maximum pressure has been reached, returning the moving part of the pliers to its original position.
– There is a pressure release valve when necessary to return the moving part of the pliers to its original position.
– C-shaped pliers mouth with large mouth width
– The pliers head can rotate 3600 around the axis
– Can be used with many sets of belts with cross-sections from 16mm2 to 400mm2
0 ₫ 0.0 VND
Memphis 9381 steel fiber cut-resistant gloves (price per piece)
GCC-9381 / Memphis - USA
- White gloves, made from stainless steel fibers  outside this textured synthetic fiber cover allows the  hand to be comfortable when worn and  does not shrink.
- Cut resistance reaches the highest level (level 5 according to ANSI-US standards)
- The surface is attached with PVC plastic panels to increase grip when holding objects.
- Suitable for use when processing food according to FDA (US Food and Drug Administration) certification. Imported by Anbaco
0 ₫ 0.0 VND
Full body seat belt SHHC-1040 (SHHS-1032 = HWR102)
SHHC-1032/1040 / S-Top (Korea)
- Material: polyester, steel hook
- 45mm full-body harness around the thighs
- 45mm belt with buckle for convenient operation
- Includes 1.5m long hanging rope and large H-3101 steel hook, the other end is attached with shock absorbing tape and triangular steel hook
- Meets Korean KOSHA and EN standards
0 ₫ 0.0 VND
Jumbo full body seat belt (blue, yellow) 2 large hooks
JUMBO TT01-MT / Vietnam*
- Material: 40mm polyester rope
- Full body type worn around thighs and abdomen, with adjustable buckles at the thighs, chest and waist.
- The hanging rope attached to the rear triangle ring is 1.5m long
- Equipped with 2 large steel hooks with 50mm opening
- Load capacity: 1000kg
- Weight: 2.2 kg
0 ₫ 0.0 VND
Jumbo full body seat belt (blue, yellow) 1 large hook
JUMBO TT01-MT / Vietnam*
- Material: 40mm polyester rope
- Full-body type worn around the thighs and abdomen, with adjustable buckle according to the wearer's size
- The hanging rope attached to the rear triangle ring is 1.5m long
- Equipped with a large hook with a mouth opening of 50mm
- Load capacity: 1000kg
- Weight: 1.6 kg
0 ₫ 0.0 VND
A2 - Seat belt, 1 small hook
AT831 / Hoa Binh (Vietnam)
- Material: 40mm polyester rope
- Belly type, with back padding, 2 D buckles
- Flat hanging rope 1.5 meters long, attached with a small steel hook with a mouth opening of 20mm
- Bearing load 1600kg
- Weight: 0.9 kg
0 ₫ 0.0 VND
A2 - Seat belt, 1 large hook
AT833 / Hoa Binh (Vietnam)
- Material: 40mm polyester rope
- Belly type, with back padding, 2 D buckles
- Flat hanging rope 1.5 meters long, attached with a large steel hook with mouth opening of 50mm
- Bearing load 1600kg
- Weight: 1.2 kg
0 ₫ 0.0 VND
HB A1 seat belt with small hook
AT831 / Hoa Binh (Vietnam)
- Material: 40mm polyester rope
- Belly type, with back padding, 2 D buckles
- Flat hanging rope 1.5 meters long, attached with a small steel hook with a mouth opening of 20mm
- Weight: 0.9 kg
0 ₫ 0.0 VND
HB A1 seat belt with large hook
AT833 / Hoa Binh (Vietnam)
- Material: 40mm polyester rope
- Belly type, with back padding, 2 D buckles
- Flat hanging rope 1.5 meters long, attached with a large steel hook with mouth opening of 50mm
- Weight: 1.2 kg
0 ₫ 0.0 VND
Adela H-32 safety harness for construction
H-32 / Adela (Taiwan)*
- Material: polyester rope, steel hook
- 45mm wide belt, 1.2 meters long, with 2 D-buckles attached, 2 length-adjustable buckles to fit waist size
- Hanging rope : Diameter 14 mm, length 1.5 meters
- Comes with 1 tool bag.
- EN362 - EN354 standards
0 ₫ 0.0 VND
Half body harness kit COV 1 aluminum hook, self-retracting cord
COV (Korea)*
- The rope is made of high quality reinforced fiber
- There is padding on the shoulders and back to create a comfortable feeling for the user
- Has a zipper on the chest
- The waist belt is adjustable in length, with a small fabric bag attached to hold tools.
- The hanging rope uses a large aluminum hook and automatically retracts.
0 ₫ 0.0 VND
KUKJE K131 half-body safety set + S/T safety lanyard (set)
K131 / Kukje (Korea)*
- Material: polyester, steel hook
- Includes 40mm body strap and 50mm waist strap with back padding and size adjustment buckle.
- Hanging rope ϕ12mm 1.5m long with large steel hook attached
- Hanging strap connected to shock absorbing tape and steel hook
- The chest strap has a clasp that can be easily removed or installed.
- The belly band has a special structure, very sturdy, easy to disassemble or install.
- Includes tool bag
- Weight: 1.6 kg/set
- Standard: KOSHA Korea, EN
0 ₫ 0.0 VND