ESS-WFB / Bullard - USA
- Glass has high heat resistance, good for use by fire fighters. Goggles can be worn directly or combined with a protective helmet.
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace.
- The product meets NFPA 1971-2000 and ANSI Z87.1 standards

ESS-XTO / Bullard - USA
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace; The elastic strap easily hangs around the top of the helmet.
- Good for use in high temperature environments, fire resistant, suitable for equipping fire fighters.
- The product meets American standards NFPA 1971-2000 and ANSI Z87.1

KI 152 / Trung Quốc
- Chống các tia có hại khi nhìn lò luyện kim. 
- Được thiết kế để dễ dàng gắn trên lưỡi trai của mũ bảo hộ lao động. 
- Mắt kính xanh Coban thang số lọc No.6.

WG 209 / LongDar (Taiwan)
- PVC plastic frame has 4 indirect vents for ventilation
- White and smoky 2-layer glasses, 5 filter scale
- Single lens glasses, size 2" x 4- 1/4'
- Used for welding work, protecting against infrared rays and splashes from all sides

WG205 / LongDar (Taiwan)
- PVC plastic frame has 4 indirect vents for ventilation
- 2-layer white and smoke-colored glasses, filter scale 5, Ø 50mm lenses
- Used for aviation work, protecting against infrared rays and splashes from all sides

WH-701 / Longdar (Taiwan)
- Material: Polypropylene
- Headgear type adjusts the knob board
- Glass window 50 x 107 mm
- Welding glass layer: 1 tempered glass and 1 No. 11 welding glass
- Inner layer: 1 eye protection glass
- Meets ANSI Z87.1 standards

WH-770 / Longdar (Taiwan)
- Material: Polypropylene
- Hat mounting type, fits all Taiwanese hats
- Glass window 50 x 107 mm
- Welding glass layer: 1 tempered glass and 1 No. 11 welding glass
- Inner layer: 1 eye protection glass
- Meets ANSI Z87.1 standards

AL7 / Blue Eagle (Taiwan)
- Material: aluminum coated fabric
- Aluminum coated outer layer protects and reflects heat well
- Withstands temperatures of 250ºC, radiant heat of 500ºC
- Dimensions: Width: 27", Length: 39"
- Protects users from dangerous environments caused by flames and splashing molten materials. Effective heat and fire prevention
- Standard: EN 11612

ACLANH5LPQ/ Anbaco (Vietnam)
- Has a waterproof outer fabric layer, has cotton and fleece in the middle to protect against cold, 2 layers of lining and fastens with a zipper
- Includes long-sleeved shirt with hood, reflective stripes on the shirt body
- Equip workers to make cold rooms and freezers to minus 40 degrees

ACLANH5L/ Anbaco (Vietnam)
- Has a waterproof outer fabric layer, has cotton and fleece in the middle to protect against cold, 2 layers of lining and fastens with a zipper
- Includes long-sleeved shirt with hood
- Equip workers to make cold rooms and freezers to minus 40 degrees

ACLANH3L/ Anbaco (Vietnam)
- Has a waterproof outer fabric layer, cold-resistant inner lining and cotton, and fastens with a zipper
- Includes long-sleeved shirt with hood
- Equipping workers in cold rooms and freezers

DFJ213ZL / MAKITA
- Weight: 0.54 kg
- Size: L
- Material: (outer layer, lining, pocket) 100% Polyester
- Controls 3 wind levels: High/Medium/Low
- Usage time: with BL1860B battery (High/ Medium/ Low): 13.5/ 24.5/ 33 hours
- Air flow: Accelerated / High / Medium / Low: 2.2 / 2.1 / 1.7 / 1.5 m³/min
(Product does not include battery or charger)

DFJ212ZM/MAKITA
- Weight: 0.43 kg
- Size: M
- Material: (outer layer, lining, pocket) 100% Polyester
- Controls 3 wind levels: High/Medium/Low
- Usage time: with BL1860B battery (High/ Medium/ Low): 13.5/ 24.5/ 33 hours
- Air flow: Accelerated / High / Medium / Low: 2.2 / 2.1 / 1.7 / 1.5 m³/min
(Product does not include battery or charger)

DFJ214Z/MAKITA
- Weight: 0.54 kg
- Size: M
- Material: (outer layer, lining, pocket) 100% Polyester
- There is gray reflection on the shirt, it stands out
- Controls 3 wind levels: High/Medium/Low
- Usage time: with BL1860B battery (High/ Medium/ Low): 13.5/ 24.5/ 33 hours
- Air flow: Accelerated / High / Medium / Low: 2.2 / 2.1 / 1.7 / 1.5 m³/min
(Product does not include battery or charger)

DCJ206YL / Makita
- Weight: 1.1 Kg
- Size: L
- Operating hours:
+ For battery BL1040B, BL1041B: High/Medium/Low: 3.5 / 5.5 / 14 hours.
+ For BL1460B battery: High/Medium/Low: 5 /9 /23 hours.
+ For BL1860B battery: High/Medium/Low: 8.5 /14 /35 hours.
- Temperature setting level: Power light is Red (High), White (medium), Blue (low).
- Material: (shell and lining) 100% Polyester.
- 5 heat zones: Front left pocket, Front right pocket, Upper left back, Upper right back, Middle back).
(Product does not include battery or charger)

DFV210ZM / MAKITA
- Size: M, L
- Weight: 0.38 kg
- Material: 100% polyester (outer layer, lining, pocket)
- Air flow: Turbo / High / Medium / Low: 2.2 / 2.1 /1.7 / 1.5 m³/min
- Usage time: with BL1860B battery Low/Medium/High: 33/24.5/13.5 hours
(Product does not include battery or charger)

DCV202YL / Maikita
- Weight: 0.4 Kg
- Material: shell and lining 100% Polyester, Side panel 85% Polyester 15% Spandex
- 4 heat zones (Front left hand pocket, Right front hand pocket, Back, back neck)
- 3 heat level settings with LED indicator that changes to blue (low), white (medium), red (high)
- Used Time:
+ With battery BL1040B/BL1041B: High/Medium/Low
- 4/7.5/14 hours+ With BL1460B battery: High/Medium/Low
- December 6, 23 hours
- With BL1860B battery:  High/Medium/Low - 10/20/35 hours
(Product does not include battery or charger)

3M level 5 cut-resistant gloves
- Tiêu chuẩn: EN 388 4121, EN 420
- Chất liệu: Sợi HPPE, Sợi thủy tinh, sợi Spandex
- Màu sắc: Xám
- Găng có lớp lót hỗn hợp polyethylene trọng lượng phân tử cực cao (UHMWP) cung cấp khả năng chống cắt, đâm thủng và rách lớn hơn. Lớp nitrile xốp tạo ra độ bám tuyệt vời, ngay cả trong điều kiện ướt hoặc dầu.

Model 48-22-8931
- Brand: Milwaukee USA
- Country of manufacture: China.
- Material combined between nylon and lycra creates a comfortable feeling. High-performance polyethylene is woven into the gloves to protect cuts
- Glove palms are made from patterned nitrile rubber to create the best grip and durability.
- SMARTSWIPE™ palm and fingertips allow use of touchscreen devices without removing gloves
- The product meets ANSI & EN standards. (ANSI Cut level 3)

Proshield / Jogger (Belgium - China)
- Material: Made from high-performance Poly Ethylene (HPPE) fiber with good cut resistance.
- The entire palm and fingers are covered with PU layer, rough layer design, increasing anti-slip, anti-oil, anti-vibration ability and increasing grip when holding.
- Size: 8, 9, 10, 11
- Provides level 5 cut resistance in EN 388:2016 - EN 420:2016 standards
- Gloves are good for use in greasy, chemical and mild acid environments
- Suitable for use in mechanical industries, construction, automobiles, mining and other heavy industries.