Rubber Insulating Sleeves Class 0/ Novax - Malaysia
- Material: synthetic rubber.
- Color: yellow
- Specifications:
+ Alternating voltage (AC): up to 1000V.
+ Test voltage (AC): 5000V/ 1 minute
+ 1-way voltage (DC): up to 1500V.
+ DC test voltage: 20,000V/ 1 minute
+ The shoulder of the shirt is industrially manufactured and embedded with materials to create an elbow-shaped curve.
+ Total shoulder length: 616mm to 749mm. (±13mm)
+ Wrist width: 146mm to 178mm (± 6mm)
+ Shoulder width: 311mm to 327 mm (± 13mm)
- Shoulders can be used both indoors and outdoors.

Class 2/NOVAX Insulating Sleeve
- Material: synthetic rubber.
- Technical parameters:
+ AC operating voltage: up to 17,000V
+ AC testing voltage: 20,000V
+ DC operating voltage: 25,500V
+ DC testing voltage: 50,000V

Rubber Insulating Sleeves Class 3 / Novax - Malaysia
- Material: synthetic rubber.
- Color: yellow/orange
- Specifications:
+ Alternating voltage (AC): up to 26,500V.
+ Test voltage (AC): 30,000V/ 1 minute
+ 1-way voltage (DC): 39,750V.
+ DC test voltage: 60,000V/ 1 minute
+ The shoulder of the shirt is industrially manufactured and embedded with materials to create an elbow-shaped curve.
+ Total shoulder length: 616mm to 749mm. (±13mm)
+ Wrist width: 146mm to 178mm (± 6mm)
+ Shoulder width: 311mm to 327 mm (± 13mm)
Shoulder insulating jackets for indoor and outdoor use

Class 0 - 280mm / Novax (Malaysia)*
- Material: insulating rubber
- Operating voltage 1000VAC
- Test voltage: 5000 VAC
- Length: 280 mm; Thickness: 1.10mm
- Meets standards: GB/T 17622-2008
- Color: Black; The palm part is covered with a rough texture, enhancing the grip of the hand operation.

ESS-WFB / Bullard - USA
- Glass has high heat resistance, good for use by fire fighters. Goggles can be worn directly or combined with a protective helmet.
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace.
- The product meets NFPA 1971-2000 and ANSI Z87.1 standards

ESS-XTO / Bullard - USA
- Glass frames are made from high heat resistant, non-flammable materials, with a structure for good air release. Anti-scratch and anti-fog lenses.
- The ventilation area is covered with an anti-corrosion, high heat resistant layer, allowing moisture to escape and filtering dust to protect the eyes.
- The glass has high impact resistance and is tested by firing the US military's MIL-V-43511C .22 caliber bullet.
- The glass holding system is very sturdy but easy to replace; The elastic strap easily hangs around the top of the helmet.
- Good for use in high temperature environments, fire resistant, suitable for equipping fire fighters.
- The product meets American standards NFPA 1971-2000 and ANSI Z87.1

KI 152 / Trung Quốc
- Chống các tia có hại khi nhìn lò luyện kim. 
- Được thiết kế để dễ dàng gắn trên lưỡi trai của mũ bảo hộ lao động. 
- Mắt kính xanh Coban thang số lọc No.6.

FCA8 / Blue Eagle - Taiwan
- Chất liệu : polycarbonate
- Kích thước : 20 cm x 48 cm ( 8" x 19")
- Độ dày : 1.5mm
- Giá trị bảo vệ hồ quang là 11 Cal/cm²
- Bộ lọc tia UV theo tỷ lệ : 2-1.7
- Tiêu chuẩn : EN166, ANSI Z87.1, CSA Z94.3, NFPA 70E, ASTM 2178, GS -ET 29

FS 801 / Longdar (Taiwan)
- Material: polycarbonate
- High impact resistance, friction and abrasion resistance
- Elastic band tied around the head or hat

Visor/Blue Eagle/Taiwan*
- Material: made from ABS plastic used in combination with a clear glass face shield.
- Uses: withstand high impact and impact, prevent objects from splashing into the eyes and face, prevent chemical splashes, help protect the face and eyes from impacts during work.
- Color: Yellow hat, clear glasses.

A2+FC25 / Blue Eagle - Taiwan
- Material: ABS plastic frame, Polycarbonate glass with aluminum border
- Good impact resistance, friction and abrasion resistance
- Glass thickness: 0.8 mm
- Size: 8 x 12″ (203 x 304 mm)
- Type mounted in combination with labor helmets to protect against chemical splashes, liquids, and flying debris such as wood workshops, processing, etc.

FS 803 / Longdar (Taiwan)
- Material: polycarbonate
- High impact resistance, friction and abrasion resistance
- Elastic band tied around the head or hat

FS 805 / Longdar (Taiwan)
- Material: polycarbonate
- High impact resistance, friction and abrasion resistance
- Headgear type adjusted by knob
- Combined from H85A frame and VCA85 glass panel

H85A+VCA85 / Longdar (Taiwan)
- Material: polycarbonate
- High impact resistance, friction and abrasion resistance
- Headgear type adjusted by knob
- Combined from H85A frame and VCA85 glass panel

WG 209 / LongDar (Taiwan)
- PVC plastic frame has 4 indirect vents for ventilation
- White and smoky 2-layer glasses, 5 filter scale
- Single lens glasses, size 2" x 4- 1/4'
- Used for welding work, protecting against infrared rays and splashes from all sides

WG205 / LongDar (Taiwan)
- PVC plastic frame has 4 indirect vents for ventilation
- 2-layer white and smoke-colored glasses, filter scale 5, Ø 50mm lenses
- Used for aviation work, protecting against infrared rays and splashes from all sides

WH-754 / Longdar (Taiwan)*
- Material: Polypropylene, resistant to mechanical impact and sparks
- Window size : 4.5"×5.25"(114mm x 133mm)
- Meets ANSI Z87.1 standards

WH-701 / Longdar (Taiwan)
- Material: Polypropylene
- Headgear type adjusts the knob board
- Glass window 50 x 107 mm
- Welding glass layer: 1 tempered glass and 1 No. 11 welding glass
- Inner layer: 1 eye protection glass
- Meets ANSI Z87.1 standards