TD - 3351 / Anbaco
- Clamp head made of aluminum alloy
- The hot line clamp has a good spring and is tightened with a threaded ring. The contact surface between the clamp and the wire is large, good and even.
- The clamp head can clamp wires with a cross section of up to 240mm².
- There are 4 clamps for 01 set of ground wires.
- Grounding wire: Multi-strand soft copper wire with clear PVC coating; Uncoated wire cross section is 16mm²/25mm², PVC coating thickness is 1mm.
- There are 4 pieces of wire, each 2m long (or longer as required).
- At each end of the wire attached to the clamp head and the middle point connecting the wire segments, there must be a pressed coss. - At the pressed coss positions, there must be a flexible rubber cover on the outside to prevent the wire from fraying or breaking due to use. long time.
- Used to ground the medium voltage grid with voltage up to 35kV before performing work

Hastings 546-6 / USA
- Middle pole type
- Length: 1.8m
- Diameter: 31.75mm
- Weight: 0.9kg

10-202 / Hastings - USA
- To cut ACSR cables, soft wires, hard wires
- Replaceable fiberglass handle with blade
- The handle is filled with single-cell foam core
- Smooth operation of the cutting knife ensures easy installation of connecting pipes
- Handle length 27", overall length 31"

567-10 / Hasting - Mỹ
Hastings 567-10 Universal Switch Stick 10′ Length 1.25” Diameter
Hastings 567-10 – This 1.25″ diameter, 10’ length universal Spline electrical Hot Stick was designed for use as a hot stick handle and can adapt with any universal tool. This electrical hot stick is made of Epoxiglas® and lightweight aluminum castings.
Tested per ASTMF-71 and OSHA

ELBT / Sofamel - Spain
- Grounding kit includes:
+ 4 clamps connected to 0.7m long pipe with insulated rubber handle.
+ Connector for use with glass wires with a diameter of 3-18 mm
+ 3 16mm2 copper sections with PVC insulation, each 0.6m long.
+ 1 carrying bag
- According to IEC 61230 standard.

24401-ES / Salisbury (USA)
- Used to pull victims out of dangerous areas
- Can be used in confined spaces, pits, and around electrical cabinets, circuit breakers, etc. or where required.
- This insulated body rescue hook has a handle reinforced with fiberglass foam, foam, high-grade insulation according to OSHA and ASTM F-711
- The body hook is bent with a width of 46cm and a thickness of 3mm
- Length: 1.8m (6ft) weighs 2kg
- Meets ASTM F-711 standards