ED-400 / Juli
- Weight: 6.4kg
- Bending force: 120kN
- Bending capacity: 120 times (with Cu 150mm2)
- Bending cycle: 6s-18s (depending on cable size)
- Belt sizes: 16,25,35,50,70,95,120,150,185,240,300,400 mm2.
- Battery source: 18V-3.0 Ah
- Charging time: 1 hour

BZ-400 / Juli
- Weight: 7.3kg
- Bending force: 120kN
- Bending capacity: 120 times (with Cu 150mm2)
- Bending cycle: 6s-8s (depending on cable size)
- Belt sizes: 16,25,35,50,70,95,120,150,,185,240,300,400 mm2.
- Battery source: 18V-3.0 Ah
- Charging time: 1 hour
- 360 degree rotating bending head for easy operation. Has LED lights and LCD screen (displays bending time, amount of electricity, error message)

HD-OD3 / Kudos
- Length: 652 mm
- Weight: 3.20 kg
- Pressing force: 4.5 tons
- Pressing ability: Copper conductor, aluminum, ACSR, copper solder, aluminum solder, steel, 6201, 5005, compressed and compact conductor.
- Fiberglass handle and lightweight high-strength aluminum alloy casting.
- Use W type mold

HYCP-4013 / Kudos
- Length: 590 (L) mm
- Weight: 7.3 kg
- Max. Pressure: 700 bar
- Oil amount: 147 cc
- Max capacity: 12.7 tons / 125 kN
- Plier mouth width: 40 mm
- Diameter of pressing wire: up to 400mm²
- Can use 12-ton belts of Alcoa, Burndy, T&B, Klauke, Cembreand Blackburn types.
- Mold sold separately includes hexagonal belt sizes CU 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400.
- 180° rotating head for convenient operation. Fiberglass handle is durable and lightweight. Externally mounted relief valve, Pressure relief valve for overload protection. Automatic low/high pressure switching with fast/slow operating motion. Two-stage hydraulic system reduces the number of hand pumps required.

HYCP-185 / Kudos
- Length: 373mm
- Weight: 2.1kg
- Pressure: 550 bar
- Capacity: 5.85 tons / 52.0 kN
- Light weight, compact and slim design. Single-acting cylinder with return spring. Accept BEKU mold type.
- Yoke and pin type head for easy mold change and removal of connectors. Integrated bypass relief valve.

UB-412 / Kudos (Taiwan)
- Material: Steel head, fiberglass arm and handle.
- Pressure: 700 bar, ~11.4 tons / 112kN
- Hydraulic pressure creation of pliers through lever arm.
- There is a pressure release valve when necessary to return the piston of the pliers to its original position.
- The pliers head can rotate 180°
- C-shaped pliers mouth according to international standards has a large pliers mouth width of 40mm, fits all types of clamping belts from other brands.
- Weight: 6.7kg
- Length: 635m
- Use the base to press all types of cosse heads or joints
- Stored in a plastic box, with CO, CQ, manufacturer's warranty and accompanying documents
- Standard: EN

Y-35 (OKT-410) / Boryung (Korea)
- Material: Steel head, fiberglass arm and handle.
- Pressure: 1000PSI, ~12 tons
- Hydraulic pressure creation of pliers through lever arm.
- There is a pressure release valve when necessary to return the piston of the pliers to its original position.
- The pliers head can rotate 180°
- C-shaped pliers mouth according to international standards has a large mouth width, fits all types of clamping belts from other brands.
- Weight: 6.2kg
- Use the base to press all kinds of connectors or joints for copper, aluminum and ACSR wires
- Set includes 11 hexagonal clamps sized: 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm²
- Stored in a plastic box, with CO, CQ, manufacturer's warranty and accompanying documents
- Standard: KOSHA (Korea)
Warranty 12 months

HBC1818/INGCO
- High quality Cr-V blades should be highly durable, resistant to force, and will not wear out or rust over time.
- Maximum cutting range: 8mm
- Dimensions: 18” (450mm)
- Highly applicable in many industries such as mechanics, factories, repair, manufacturing, machinery warranty...

HYSC-24 / Kudos
- Length: 360 mm
- Weight: 2.6 kg
- Maximum pressure: 700 bar
- Capacity: 7.45 tons / 66.3 kN
- Cutting capacity: 24mm cable / Copper wire: 24mm / Aluminum wire: 24mm / ACSR: 24mm / Mild steel bar: 16mm
- 180˚ rotating head for convenient operation. Superior guillotine cutting for less jamming than guillotine mowers. All blades can be easily replaced.
- Top flip latch for easy insertion of cutting material. Single stage pump action with return spring. No setup time required.

HYSC-32 / Kudos
- Length: 580 mm
- Weight: 9.1 kg
- Maximum pressure: 700 bar
- Capacity: 15.82 tons / 140.7 kN
- Cutting capacity: 32mm cable / 25-32mm steel / Copper wire: 32mm / Al wire: 32mm / ACSR: 32mm
- 180˚ rotating head for convenient operation. Superior guillotine cutting for less jamming than guillotine mowers. All blades can be easily replaced.
- Top flip latch for easy insertion of cutting material. Single stage pump action with return spring. No setup time required.

S24 / Kudos
- Length: 425 mm
- Weight: 3.9 kg
- Maximum pressure: 700 bar
- Capacity: 8.78 tons / 78.1 kN
- Cutting capacity: Cable 18-24 mm / Steel 20 mm / Copper wire: 24 mm / Aluminum wire: 24 mm / ACSR: 24mm
- 180˚ rotating head for convenient operation. Superior guillotine cutting for less jamming than guillotine mowers. All blades can be easily replaced.
- Top flip latch for easy insertion of cutting material. Single stage pump action with return spring. No setup time required.

HYSC-45 / Kudos
- Length: 683mm
- Weight: 6.7kg
- Force: 700bar ; 10.73 tons ; 95.5 kN
- Cutting capacity: 40mm
- Single acting cylinder with return spring. The locking pin type head and 180˚ rotation allow for easy cutting positioning.
- Guillotine cutting for less jamming than shear cutting. No setup time required. The blade can be easily replaced.

TC-500/Juli
- Length: 810mm
- Weight: 3kg
- Cutting capacity: Max 500 mm2 with CU/AI

TC-250 / Juli
- Length: 600mm
- Weight: 1.8kg
- Cutting capacity: Max 240 mm2 with CU/AI

TC-100 / Juli
- Length: 320mm
- Weight: 0.7kg
- Cutting capacity: Max 120 mm2 with CU/AI

CPC-40BL / Juli
- Length: 600mm
- Weight: 5.6kg
- Cutting force: 60kN
- Cutting capacity: 40mm (ACSR cable); 28mm (steel)

ESG 45 / KLAUKE - Germany
- Cutting force: 70 kN
- Maximum cutting diameter: 45 mm
- Power source: Bosh/Makita rechargeable battery type 18V 3.0 Ah (or Bosch 5.0 Ah)
- Weight (including battery): 5.9 kg
- Operating temperature: -10°C - 40°C
- Used to cut copper cables, aluminum cables, ACSR cables. Also suitable for cutting aluminum, copper and steel in round shapes.
- All data can be read easily via Bluetooth. Save time when cutting multiple times thanks to the quick opening mechanism. There are LED lights that illuminate the work area

CC-185 / Kudos
- Length: 600 mm
- Weight: 1.80 kg
- For copper and aluminum cables with an area of ​​up to 185 square mm
- Compound handle design, easy cutting.