DFJ213ZL / MAKITA
- Weight: 0.54 kg
- Size: L
- Material: (outer layer, lining, pocket) 100% Polyester
- Controls 3 wind levels: High/Medium/Low
- Usage time: with BL1860B battery (High/ Medium/ Low): 13.5/ 24.5/ 33 hours
- Air flow: Accelerated / High / Medium / Low: 2.2 / 2.1 / 1.7 / 1.5 m³/min
(Product does not include battery or charger)

DFJ212ZM/MAKITA
- Weight: 0.43 kg
- Size: M
- Material: (outer layer, lining, pocket) 100% Polyester
- Controls 3 wind levels: High/Medium/Low
- Usage time: with BL1860B battery (High/ Medium/ Low): 13.5/ 24.5/ 33 hours
- Air flow: Accelerated / High / Medium / Low: 2.2 / 2.1 / 1.7 / 1.5 m³/min
(Product does not include battery or charger)

DFJ214Z/MAKITA
- Weight: 0.54 kg
- Size: M
- Material: (outer layer, lining, pocket) 100% Polyester
- There is gray reflection on the shirt, it stands out
- Controls 3 wind levels: High/Medium/Low
- Usage time: with BL1860B battery (High/ Medium/ Low): 13.5/ 24.5/ 33 hours
- Air flow: Accelerated / High / Medium / Low: 2.2 / 2.1 / 1.7 / 1.5 m³/min
(Product does not include battery or charger)

DFV210ZM / MAKITA
- Size: M, L
- Weight: 0.38 kg
- Material: 100% polyester (outer layer, lining, pocket)
- Air flow: Turbo / High / Medium / Low: 2.2 / 2.1 /1.7 / 1.5 m³/min
- Usage time: with BL1860B battery Low/Medium/High: 33/24.5/13.5 hours
(Product does not include battery or charger)

DCV202YL / Maikita
- Weight: 0.4 Kg
- Material: shell and lining 100% Polyester, Side panel 85% Polyester 15% Spandex
- 4 heat zones (Front left hand pocket, Right front hand pocket, Back, back neck)
- 3 heat level settings with LED indicator that changes to blue (low), white (medium), red (high)
- Used Time:
+ With battery BL1040B/BL1041B: High/Medium/Low
- 4/7.5/14 hours+ With BL1460B battery: High/Medium/Low
- December 6, 23 hours
- With BL1860B battery:  High/Medium/Low - 10/20/35 hours
(Product does not include battery or charger)

Contructo / Jogger (Belgium-China)*
- Material: Cotton/polyester lining with green latex coating
- Wrinkled latex coating provides good grip, friction, abrasion resistance
- Standard: ANSI/ISEA 105:2016; EN ISO 21420:2020 ; EN 388:2016
- Used in jobs involving grease, chemicals and mild acids.
- Size: 7~11

Unix5100 + filter 531 (A1B1E1K1) / Sorbent (Rusia)*
- Material: Silicon
- Filter cartridge 531 with the ability to filter inhaled air from organic, inorganic and acidic gases and vapors, ammonia and its organic derivatives. The filter is used when the volumetric oxygen content in the air is at least 17%, with the content of gases and vapor harmful substances at ambient temperatures from - 40 to + 40 ° C.
- The product meets and exceeds  European standards EN 14387
- Effective time of the filter cartridge :  Test results with sample toxic gas vapors (with specified concentration, flow, temperature, humidity) are much higher than the requirements of the standard EN 14387 - copper Meaning longer usage time. Specifically:
+ protective effect time with  Hydrogen Cyanide is 2 times higher
+ The protective effect time with Chlorine is 2.5 times higher
+ The duration of protective effect with Hydrogen sulfide is 2 times higher
- Respiratory resistance: respiratory resistance is 60% smaller than EN 14387 and EN 143 regulations (equal to 58.8/100Pa). This is an important indicator, especially when used in hard working conditions. Lighter breathing helps the wearer spend less effort and can maintain wearing the mask for a long time.
- Filter box weight: 130g lighter than EN regulations.
- Meets EN136 Class 2, EN 14387, CE standards

Unix5000 (MAG-2 )/120+ A1B1E1 / Sorbent (Russia)
- Material: rubber
- Large glass panels help wide field of view, the wearer can observe the whole scene ahead, thus helping them orient themselves well, very useful in emergencies, on the other hand, creating a feeling of not being cramped or confined when using. .
- 2-layer contact (semi-face on the inside and full face on the outside) helps the product have one size but can be used for people with different faces.
- Quick and easy to put on and take off. The carrying strap connects at 5 points allowing for direct adjustment once worn  on the head.
- Selling masks inside helps prevent water vapor from fogging up glasses and reduces CO 2 (carbon dioxide) content in the air inhaled into the lungs;
- Comes with two toxic gas filter boxes #120. Toxic vapor filter cartridge is used to: Filter organic and inorganic vapors, paint spraying, and pesticides
- Meets EN136 Class 2, EN 14387, CE standards

Unix 1000 / Sorbent (Russia)
- Use with DOTeco 120 A2 /  DOTeco+ 120 A1B1E1 / DOTeco+ 120 A1B1E1K1/  .... filter cartridges depending on protection requirements.
- Material: safe and thermoplastic TPE.
- The half-mask parts can be disassembled for easy cleaning.
- Designed to not be affected when wearing eye, head and ear protection.

Unix 1100 / Sorbent (Rusia)*
- Silicone material is very soft
- Light weight, easy to use.
- Head harness: Easy to use, adjustable for a tight mask by adjusting size in 5 positions.
- Soft silicone material creates minimal pressure on the part in contact with the face.
- Parts of the mask can be disassembled for easy cleaning.
- Designed to not interfere with wearing eye and head protection and noise-canceling earplugs. The hook system makes it easy to connect to the filter.

Unix 1000 + phin 531 / Sorbent (Russia)*
- Light weight, easy to use.
- Head harness: Easy to use, adjustable for a tight mask by adjusting size in 5 positions.
- Parts of the mask can be disassembled for easy cleaning.
- Designed to not interfere with wearing eye and head protection and noise-canceling earplugs.
- Filters out organic toxic gases; inorganic (such as Cl2, H2S, HCN,...); SO2, acid and ammonia.
- Effective time of the filter cartridge :  Test results with sample toxic gas vapors (with specified concentration, flow, temperature, humidity) are much higher than the requirements of the standard EN 14387 - copper Meaning longer usage time.
- Respiratory resistance: respiratory resistance is 60% smaller than EN 14387 and EN 143 regulations (equal to 58.8/100Pa). This is an important indicator, especially when used in hard working conditions.
- Lighter breathing helps the wearer spend less effort and can maintain wearing the mask for a long time.
-Filter box weight: 130g lighter than EN regulations.

GHG 18V-50 / BOSCH
- Battery voltage: 18 V
- Working temperature: 300 - 500 °C
- Air flow: 175 liters/minute
- Heating time: 6s
- Weight (without battery): 0.59 kg
- Fast heating to 300°C within 6 seconds
- Two temperature levels (300/500°C) and LED light for easy operation

CIRLI2002/Ingco
- Brushless motor
- Voltage: 20V
- Hexagonal shaft: 6.35mm
- No-load speed: 0-1300 / 0-2100 / rpm
- Impact speed: 0-2000 / 0-3300 / min
- Maximum torque: 170NM
- With 2pcs 2.0Ah battery pack; With 1pc charger
- Charging: 220V-240V ~ 50 / 60Hz
- Integrated work light + LED battery power indicator
- With 2 screwdriver bits + 3 nut locators

GBG 60-20 / BOSCH
- Power: 600 W
- Grinding wheel diameter: 200mm
- Grinding wheel width: 25mm
- Weight: 15Kg
- No-load speed: 3600 rpm
- Grinding wheel base hole diameter: 32mm
- Rugged, die-cast aluminum housing with sealed ball bearings keeps the motor dust-free for long-lasting performance
- Solid base ensures the machine is in safe working conditions and maintains balance
- Includes tool-free adjustable workpiece holders, steel guard and spark guard.

GBG 35-15 / BOSCH
- Capacity: 350W
- Grinding wheel diameter: 150mm
- Grinding wheel width: 20mm
- Weight: 10Kg
- No-load speed: 3000 rpm
- Grinding wheel base hole diameter: 20mm
- Rugged, die-cast aluminum housing with sealed ball bearings keeps the motor dust-free for long-lasting performance
- Solid base ensures the machine is in safe working conditions and maintains balance
- Includes tool-free adjustable workpiece holders, steel guard guard and spark arrester cap

CIDLI20608/Ingco
- Brushless motor
- Voltage: 20V
- No-load speed: 0-450/ 0-1900/min
- Maximum torque: 60NM
- Maximum hammer speed: 22500/min
- Drill clamp head size: 0-13mm
- Torque setting: 23 + 1 + 1
- 2-speed mechanical sprocket
- 20V Lithium-Ion 2.0Ah battery
- With 2pcs battery pack + With 1 fast charger
- Charging volts: 220V-240V ~ 50/60Hz
- Integrated work light, LED battery power indicator

VCDLI1221/Ingco
- Drilling voltage: 12V
- No-load speed: 0-350/0-1350/min
- Maximum torque: 25NM
- Maximum drilling capacity: 0.8- 10mm
- Twist adjustment: 15+1
- Li-ion battery capacity: 12V/1.5Ah
- 2-speed mechanical sprocket.
- Comes with 1 battery and 1 charger, each battery charges for 2 hours
- Charging voltage: 100V-240V~50/60Hz
- Includes 1 65mm Cr-V tip, battery
- There is an LED light that shows the battery capacity

CDLI200215/Ingco
- Voltage: 20V
- No-load speed: 0-400/0-1500/min
- Maximum torque: 45NM
- Drill chuck head: 0.8-10mm
- Torque setting: 15+1
- 2-speed mechanical sprocket - P20S Lithium-Ion 2.0Ah battery
- With 2 P20S 2.0Ah battery packs + 1 smart fast charger
- Charging: 220V-240V ~ 50 / 60Hz
- Integrated work light, LED battery power indicator
- Weight: 3 kg

CIDLI20031 / Ingco- Voltage: 20V
- No-load speed: 0-450 / 0-1900 / min
- Maximum torque: 55NM
- Maximum impact force: 22,500/min
- Drill chuck head: 2.0-13mm
- Torque setting: 23 + 1 + 1
- 2-speed mechanical sprocket
- 20V Lithium-Ion 2.0Ah battery
- With 2pcs battery pack + 1 fast charger
- Charging: 220V-240V ~ 50 / 60Hz
- Integrated work light, LED battery indicator, with 50 accessories
- Weight: 3 kg

CIDLI1232/Ingco
- Voltage: 12V
- No-load speed: 0-350/0-1350/min.
- Maximum hammer force: 22500/min
- Maximum tightening force: 20NM
- Drilling capacity: 0.8-10mm
- Torque adjustment: 18+1+1
- 2-speed mechanical sprocket
- Charging voltage: 220V-240V~50/60Hz
- LED lights support work.
- Comes with 2 batteries and 1 2-hour charger.
- Comes with 1 CR-V 65mm screwdriver bit and 3 drill bits.