.
.
.
.
Kudos HYSC-45 cutting pliers
HYSC-45 / Kudos
- Length: 683mm
- Weight: 6.7kg
- Force: 700bar ; 10.73 tons ; 95.5 kN
- Cutting capacity: 40mm
- Single acting cylinder with return spring. The locking pin type head and 180˚ rotation allow for easy cutting positioning.
- Guillotine cutting for less jamming than shear cutting. No setup time required. The blade can be easily replaced.
0 ₫ 0.0 VND
Juli TC-500 cutting pliers (500mm) CU/Al
TC-500/Juli
- Length: 810mm
- Weight: 3kg
- Cutting capacity: Max 500 mm2 with CU/AI
0 ₫ 0.0 VND
Juli TC-250 cutting pliers (240mm) CU/Al
TC-250 / Juli
- Length: 600mm
- Weight: 1.8kg
- Cutting capacity: Max 240 mm2 with CU/AI
0 ₫ 0.0 VND
Juli TC-100 cutting pliers (120mm) CU/Al
TC-100 / Juli
- Length: 320mm
- Weight: 0.7kg
- Cutting capacity: Max 120 mm2 with CU/AI
0 ₫ 0.0 VND
Juli CPC-40BL cutting pliers
CPC-40BL / Juli
- Length: 600mm
- Weight: 5.6kg
- Cutting force: 60kN
- Cutting capacity: 40mm (ACSR cable); 28mm (steel)
0 ₫ 0.0 VND
ACSR Cordless Cutting Pliers 45mm OD Klauke ESG45-CFM
ESG 45 / KLAUKE - Germany
- Cutting force: 70 kN
- Maximum cutting diameter: 45 mm
- Power source: Bosh/Makita rechargeable battery type 18V 3.0 Ah (or Bosch 5.0 Ah)
- Weight (including battery): 5.9 kg
- Operating temperature: -10°C - 40°C
- Used to cut copper cables, aluminum cables, ACSR cables. Also suitable for cutting aluminum, copper and steel in round shapes.
- All data can be read easily via Bluetooth. Save time when cutting multiple times thanks to the quick opening mechanism. There are LED lights that illuminate the work area
0 ₫ 0.0 VND
Kudos CC-185 185mm2 wire cutting pliers
CC-185 / Kudos
- Length: 600 mm
- Weight: 1.80 kg
- For copper and aluminum cables with an area of ​​up to 185 square mm
- Compound handle design, easy cutting.
0 ₫ 0.0 VND
INGCO 180mm High Quality Cutting Pliers - HHLDCP28180
HHLDCP28180 /INGCO
- Size: 7 inches/180mm
- Material made of high-strength CR-V steel, good bearing capacity, does not wear and rust over time.
- Handle in two colors: black and yellow. The design increases grip to help users hold more firmly even when exposed to oil, grease, water, etc.
- Save 30% power compared to conventional cutting pliers - 36/T
- Able to grip and cut sturdy things such as copper, steel, aluminum...
0 ₫ 0.0 VND
Locking Pliers (10 inches) INGCO - HCJLW0210
HCJLW0210/Ingco
- Size:  10”
- Material: Carbon steel, Nickel plated - 30/T- HRC38° - HRC48°
- Ability to withstand heat, force, and withstand strong impacts without deformation.
- Design to increase friction to help prevent the handle from slipping when exposed to oil, sweat, etc.
0 ₫ 0.0 VND
Juli HSC 86-4A cose press pliers
HSC8 6-4A / Juli
- Length: 175mm
- Weight: 0.39kg
- Bending capacity: 0.25-6 mm2
0 ₫ 0.0 VND
Juli HD-50L cose press pliers (5.5-50mm)
HD-50L / Juli
- Length: 365mm
- Weight: 0.8kg
- Bending capacity: 5.5-50 mm2
0 ₫ 0.0 VND
Juli HD-25L cose press pliers (5.5-25mm)
HD-25L / Juli
- Length: 350mm
- Weight: 0.7kg
- Bending capacity: 5.5-25 mm2
0 ₫ 0.0 VND
Juli HD-16L cose press pliers (1.25-16mm)
HD-16L / Juli
- Length: 280mm
- Weight: 0.47kg
- Bending range: 1.25-16 mm2
0 ₫ 0.0 VND
Electrically check the SEW 287SVD helmet
287SVD / SEW - Taiwan
- Voltage detection distance
+ 6.6kV (3.8kV phase to ground): 40cm ± 20%
+ 11.4kV (6.6kV phase to ground): 55cm ± 20%
+ 19.7kV (11.4kV phase to ground): 80cm ± 20%
+ 22.8kV (13.2kV ​​phase to ground): 85cm ± 20%
- Water resistance: good, level IP65. Different types of AC voltage can be detected. Low power consumption. CE certification
- Warning start distance: 85cm for 22.8kV (phase – phase)
- Frequency: 50 / 60Hz. Siren: 70dB or higher at 1m distance
- Operating temperature: 0°C - 40°C. Humidity: 80%
- External dimensions: 61(L) x 62(W) x18.5(D) mm
- Weight: 70g (including battery)
- Battery: CR2032. Battery life: 50 hours of continuous use
Used to signal the user has entered a dangerous area with high voltage. Warning by sound signal (loud) and LED light. Used to wear on the wrist or on a hat.
0 ₫ 0.0 VND
Electrically check the SEW 286SVD helmet
286SVD / SEW - Taiwan
- Water resistance: good, level IP65. Different types of AC voltage can be detected. Low power consumption. CE certification
- Warning start distance: 80cm for 11.4kV (phase – phase)
- Frequency: 50 / 60Hz. Siren: 70dB or higher at 1m distance
- Operating temperature: 0°C - 40°C. Humidity: 80%
- External dimensions: 59(L) x 56(W) x18(D) mm
- Weight: 35g (including battery)
- Battery: CR2032. Battery life: 50 hours of continuous use
Used to signal the user has entered a dangerous area with high voltage. Warning by sound signal (loud) and LED light. Used to wear on the wrist or on a hat.
0 ₫ 0.0 VND
Longdar H85 visor holder with knob
H85 / Longdar (Taiwan)
- Material: plastic frame, adjustable with knob
- Fits Longdar's VCA85 glass panels
- ANSI Z87.1, CSA Z94.3 standards
0 ₫ 0.0 VND
Longdar H86 Face Shield Holder
H-86 / Longdar (Taiwan)
- Material: plastic frame, wire held by plastic-coated steel core
- Fits Longdar's VCA85 glass panels
0 ₫ 0.0 VND
Blue Eagle A2 helmet mounting bracket attaches the visor
Helmet with visor / Blue Eagle / Taiwan
- Material: made from ABS plastic used in combination with a clear glass face shield.
- Uses: withstand high impact and impact, prevent objects from splashing into the eyes and face, prevent chemical splashes, help protect the face and eyes from impacts during work.
- Color: Yellow hat, clear glasses.
0 ₫ 0.0 VND
VC65 mask with neck strap (box)
KT VC65-VN / Vietnam
- Material: 3 layers (Dust filter layer, activated carbon layer and sweat absorbent fabric layer)
- Neck strap (with carrying case)
- The activated carbon filter layer pressed into the non-woven fabric prevents most of the penetration into the respiratory tract of extremely small dust particles and other pollutants. Filters odors, chemicals, gasoline odors and smoke.
- Meets TC01:2004 standards
0 ₫ 0.0 VND