CIRLI2002/Ingco
- Brushless motor
- Voltage: 20V
- Hexagonal shaft: 6.35mm
- No-load speed: 0-1300 / 0-2100 / rpm
- Impact speed: 0-2000 / 0-3300 / min
- Maximum torque: 170NM
- With 2pcs 2.0Ah battery pack; With 1pc charger
- Charging: 220V-240V ~ 50 / 60Hz
- Integrated work light + LED battery power indicator
- With 2 screwdriver bits + 3 nut locators

CIDLI20608/Ingco
- Brushless motor
- Voltage: 20V
- No-load speed: 0-450/ 0-1900/min
- Maximum torque: 60NM
- Maximum hammer speed: 22500/min
- Drill clamp head size: 0-13mm
- Torque setting: 23 + 1 + 1
- 2-speed mechanical sprocket
- 20V Lithium-Ion 2.0Ah battery
- With 2pcs battery pack + With 1 fast charger
- Charging volts: 220V-240V ~ 50/60Hz
- Integrated work light, LED battery power indicator

VCDLI1221/Ingco
- Drilling voltage: 12V
- No-load speed: 0-350/0-1350/min
- Maximum torque: 25NM
- Maximum drilling capacity: 0.8- 10mm
- Twist adjustment: 15+1
- Li-ion battery capacity: 12V/1.5Ah
- 2-speed mechanical sprocket.
- Comes with 1 battery and 1 charger, each battery charges for 2 hours
- Charging voltage: 100V-240V~50/60Hz
- Includes 1 65mm Cr-V tip, battery
- There is an LED light that shows the battery capacity

CDLI200215/Ingco
- Voltage: 20V
- No-load speed: 0-400/0-1500/min
- Maximum torque: 45NM
- Drill chuck head: 0.8-10mm
- Torque setting: 15+1
- 2-speed mechanical sprocket - P20S Lithium-Ion 2.0Ah battery
- With 2 P20S 2.0Ah battery packs + 1 smart fast charger
- Charging: 220V-240V ~ 50 / 60Hz
- Integrated work light, LED battery power indicator
- Weight: 3 kg

CIDLI20031 / Ingco- Voltage: 20V
- No-load speed: 0-450 / 0-1900 / min
- Maximum torque: 55NM
- Maximum impact force: 22,500/min
- Drill chuck head: 2.0-13mm
- Torque setting: 23 + 1 + 1
- 2-speed mechanical sprocket
- 20V Lithium-Ion 2.0Ah battery
- With 2pcs battery pack + 1 fast charger
- Charging: 220V-240V ~ 50 / 60Hz
- Integrated work light, LED battery indicator, with 50 accessories
- Weight: 3 kg

CIDLI1232/Ingco
- Voltage: 12V
- No-load speed: 0-350/0-1350/min.
- Maximum hammer force: 22500/min
- Maximum tightening force: 20NM
- Drilling capacity: 0.8-10mm
- Torque adjustment: 18+1+1
- 2-speed mechanical sprocket
- Charging voltage: 220V-240V~50/60Hz
- LED lights support work.
- Comes with 2 batteries and 1 2-hour charger.
- Comes with 1 CR-V 65mm screwdriver bit and 3 drill bits.

HBTCP6008L/Ingco
- Current: 600AMP
- Has LED lights
- Cable outer diameter: 10mm
- Cable length: 3m
- Clip size: 18x11cm
- Suitable for cars with emissions ≤4.5L
- Cable material: copper coated

VD100026 / Ingco
- AC voltage:
+ 12V~1000V(High sensitivity)
+ 48V~1000V(Low sensitivity)
- Frequency: 50/60Hz
- Alarm mode: Sound and light alarm
- Flash: White LED

HCFL1865051/ INGCO
- Material: Waterproof plastic
- Adjustable brightness: 450 lumens – 150 lumens – 50 lumens
- LED bulb with 5 light modes
- 2000mah 18650 Li-ion battery - Charge directly on the lamp body.
- Diameter/length: 34mm/141mm
- Net weight: 125g"